A single riveted joint is to be made in 10mm thick plates with 2mm diameter rivets with a pitch of 60mm calculate the efficiency of the joints ​

Hi, your answer is not correct. this is a cumulative  

Ohm's law tells you that i = v/r where v is equivalent voltage and r is equivalent resistance of the circuit
since all circuits have the same voltage, your question is really asking which circuit has the lowest total resistance, since the lower the resistance, the higher the current
circuit a has a resistance of 5 ohms; circuit c is in series so has a resistance of 10 ohms; circuit b is in parallel and therefore has a resistance of 2.5 ohms (review your notes on adding resistances in parallel and series); therefore b has the highest current