subject
Physics, 09.03.2021 22:50 Viishnu15

Plz help 100 points Here is your goal for this lesson:

Diagram the magnetic fields around the magnets

These supplies are needed:

two bar magnets
one horseshoe magnet
iron filings
sheet of glass or plastic
several sheets of paper
Bar Magnet
1. Place the bar magnet on a table.
2. Put a sheet of glass or plastic over the magnet.
3. Sprinkle the iron filings over the sheet evenly.
4. On a separate paper, sketch the magnet. Show the lines made by the iron filings.
Horseshoe Magnet
5. Place a horseshoe magnet on the table.
6. Put a sheet of glass or plastic over the magnet.
7. Sprinkle the iron filings over the sheet.
8. On a separate paper, sketch the magnet. Show the lines made by the iron filings.
N Pole to N Pole
9. Place two bar magnets N pole to N pole with an inch between them.
10. Put a piece of glass or plastic over the magnets.
11. Sprinkle the iron filings over the glass or plastic.
12. On a separate paper sketch the magnets. Show the lines made by the iron filings.
N Pole to S Pole
13. Turn one of the bar magnets around so the magnets are N pole to S pole with an inch between.
14. Sprinkle the iron filings over the glass or plastic.
15. On a separate paper sketch the magnets. Show the lines made by the iron filings.
From the information you have observed, determine the following:
What rule of magnetism is illustrated by the lines of the iron filings in Step 12?
What rule of magnetism is illustrated by the lines of the iron filings in Step 15?
Why was glass or plastic used to separate the filings from the magnets in the experiments?
Did the glass or plastic stop the passage of the magnetic lines of force?
Did the iron filings almost or completely bridge the open end of the horseshoe magnet?

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 19:00
What term do psychologists use to designate our personal awareness of feelings, sensations, and thoughts?
Answers: 1
question
Physics, 22.06.2019 00:00
What should the power status of a circuit be when measuring resistance with an ohmmeter?
Answers: 2
question
Physics, 22.06.2019 00:00
Name three different units of energy used to measure heat and describe what type of situations each is usually used.
Answers: 2
question
Physics, 22.06.2019 10:50
The temperature at a point (x, y) is t(x, y), measured in degrees celsius. a bug crawls so that its position after t seconds is given by x = 6 + t , y = 8 + 1 3 t, where x and y are measured in centimeters. the temperature function satisfies tx(3, 9) = 5 and ty(3, 9) = 4. how fast is the temperature rising on the bug's path after 3 seconds? (round your answer to two decimal places.)
Answers: 3
You know the right answer?
Plz help 100 points Here is your goal for this lesson:

Diagram the magnetic fields arou...
Questions
question
Advanced Placement (AP), 29.09.2019 14:30
question
Social Studies, 29.09.2019 14:30
Questions on the website: 13722367