subject
Physics, 04.03.2021 04:10 ash10136

A uniform meter rule is pivoted at it center load of 15 and 20 are placed at the 10cm and 20cm marks respectively and the meter rule is balanced horizontally by a load of 40n on the other side of the pivoted. Calculate the distance of the 40n from the pivot?

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 15:50
The metal wire in an incandescent lightbulb glows when the light is switched on and stops glowing when it is switched off. this simple process iswhich kind of a change? a.a physical changeb. a chemical changec. a nuclear changed. an ionic change
Answers: 1
question
Physics, 22.06.2019 00:30
Glass is transparent to visibile light under normal conditions; however, at extremely high intensities, glass will absorb most of the light incident upon it. this works through a process known as multiphoton absorption. in this process, several photons are absorbed at the same time. if very intense light whose photons carry 2ev of energy is shined onto a material with a band gap of 4ev, that light can be absorbed through two-photon absorption, because two photons have the right amount of energy to bridge the band gap. what is the minimum number of photons of 800-nm light that are needed to equal or exceed the band gap of fused silica glass
Answers: 1
question
Physics, 22.06.2019 03:30
As part of an industrial process, air as an ideal gas at 10 bar, 400k expands at steady state through a valve to a pressure of 4 bar. the mass flow rate of air is 0.5 kg/s. the air then passes through a heat exchanger where it is cooled to a temperature of 295k with negligible change in pressure. the valve can be modeled as a throttling process, and kinetic and potential energy effects can be neglected. (a) for a control volume enclosing the valve and heat exchanger and enough of the local surroundings that the heat transfer occurs at the ambient temperature of 295 k, determine the rate of entropy production, in kw/k. (b) if the expansion valve were replaced by an adiabatic turbine operating isentropically, what would be the entropy production? compare the results of parts (a) and (b) and discuss.
Answers: 3
question
Physics, 22.06.2019 09:40
When you jump from an elevated position you usually bend your knees upon reaching the ground. by doing this, you make the time of the impact about 10 times as great as for a stiff-legged landing. in this way the average force your body experiences is a) less than 1/10 as great. b) more than 1/10 as great. c) about 1/10 as great.d) about 10 times as great.
Answers: 1
You know the right answer?
A uniform meter rule is pivoted at it center load of 15 and 20 are placed at the 10cm and 20cm marks...
Questions
question
Mathematics, 12.12.2020 16:30
question
English, 12.12.2020 16:30
question
English, 12.12.2020 16:30
question
Mathematics, 12.12.2020 16:30
Questions on the website: 13722362