Physics, 02.03.2021 21:10 smann211

¿Qué proporción deberían guardar los platos de una prensa hidráulica para que, aplicando 40N de fuerza en el plato menor, podamos levantar un objeto de 80Kg en el plato mayor?

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 03:10

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

Answers: 2

Answer

Physics, 22.06.2019 05:10

Which situation will have the highest resistance? a.long wire and high temperatureb.short wire and high temperaturec.long wire and cold temperaturedshort wire and low temperature

Answers: 2

Answer

Physics, 22.06.2019 12:10

Consider a one meter long horizontal pipe with a constant 100 cm^2 cross sectional area. water flows rightward into the pipe at x = 0 with flow velocity 02m/sec at every point within the pipe intake area. at x=1, the rightward flow rate is 0.192 m/sec. assume the water is a conserved quantity in the pipe, so there must be a leak (a sink) somewhere in the pipe. 1. compute net volumetric flow of the source if the system to be in equilibrium. 2. now assume the pipe in the problem has no leaks. compute the net volumetric rate of change for the system.

Answers: 3

Answer

Physics, 22.06.2019 21:00

How is the acceleration of an object in uniform circular motion constant? a - in magnitude only b - in direction only c - in both magnitude and direction d - in magnitude, direction & orientation

Answers: 3

Answer

You know the right answer?

¿Qué proporción deberían guardar los platos de una prensa hidráulica para que, aplicando 40N de fuer...

Questions