Le Sub hele
L'athlite Ponce le poids
de chop tire le froiness
betet
arroche to clos
de chantie
Le vent fait
peacher Partie
Au contact ou à distance ?
Effet visible
Las dos actionnent to cacaue
Point d'application
tha moun et le poids desite
Direction
Sens
2
horizontal
3
6
9
12
comtact
distance
distance
Contact
contact
contact
contact
contact
13
15
20
Après avoir rempli le tableau, schématiser les forces (on ne tiendra pas compte de l'intensité).

The place you get your hair cut has two nearly parallel mirrors 6.00 m apart. as you sit in the chair, your head is 2.00 m from the nearer mirror. looking toward this mirror, you first see your face and then, farther away, the back of your head. (the mirrors need to be slightly nonparallel for you to be able to see the back of your head, but you can treat them as parallel in this problem.) how far away does the back of your head appear to be?

Acoil formed by wrapping 80 turns of wire in the shape of a square is positioned in a magnetic field so that the normal to the plane of the coil makes an angle of 28.0° with the direction of the field. when the magnetic field is increased uniformly from 200 µt to 600 µt in 0.400 as, an emf of magnitude 80.0 mv is induced in the coil. what is the total length of the wire?

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.