L1 =1/4 h, L2= 3/4h, L3= 5/4h , L4= 7/4h Above written equation provide a means to determine the end correction for the tube. Using the value of the average h for the first tuning fork, calculate values for L1 and L2 from those equations. They should be larger than the measured values by an amount equal to the end correction. Repeat the calculation for the second tuning fork. Compare these values for the end corrections and comments on the consistency of the results.
Answers: 2
Physics, 21.06.2019 21:30
Apendulum has a mass of 1.5 kg and starts at a height of 0.4 m. if it is released from rest, how fast is it going when it reaches the lowest point of its path? acceleration due to gravity is g = 9.8 m/s2. a. 2.8 m/s b. 0 m/s c. 5.9 m/s d. 4.3 m/s
Answers: 1
Physics, 22.06.2019 09:30
How would a small bar magnet be oriented when placed at position x?
Answers: 2
Physics, 22.06.2019 12:30
Consider a 1000 w iron whose base plate is made of 0.5 cm thick aluminum alloy 2024-t6 (ρ = 2770 kg/m3 and cp = 875 j/kg°c). the base plate has a surface area of 0.03 m2. initially, the iron is in thermal equilibrium with the ambient air at 22°c. assuming 90% of the heat generated in the resistance wires is transferred to the plate, determine the minimum time needed for the plate temperature to reach 200°c.
Answers: 1
L1 =1/4 h, L2= 3/4h, L3= 5/4h , L4= 7/4h
Above written equation provide a means to determine the en...
English, 07.11.2020 07:10
English, 07.11.2020 07:10
Arts, 07.11.2020 07:10
Physics, 07.11.2020 07:10
Chemistry, 07.11.2020 07:10
Physics, 07.11.2020 07:10
Mathematics, 07.11.2020 07:10
Mathematics, 07.11.2020 07:10
English, 07.11.2020 07:10