A truck travels at a constant speed of 45 m/s. How much work did the truck engine do during a 2 hour period if it supplied a force of 25 kN of force.

What is the freezing point of radiator fluid that is 50% antifreeze by mass? kf for water is 1.86 ∘c/m.

The great sandini is a 60.0-kg circus performer who is shot from a cannon (actually a spring gun). you don’t find many men of his caliber, so you him design a new gun. this new gun has a very large spring with a very small mass and a force constant of 1100 n/m that he will compress with a force of 4400 n. the inside of the gun barrel is coated with teflon, so the average friction force will be only 40.0 n during the 4.00 m he moves in the barrel. at what speed will he emerge from the end of the barrel, 2.50 m above his initial rest position?

The inside surface of a cylindrical-shaped cave of inner diameter 1.0 m is continuously covered with a very thin layer of water. the cave is very long and it is open on both ends. the water on the cave surface is at a constant temperature of 15.5 °c. the cave is constantly exposed to wind such that 15.5 °c air flows through the cave at 4.5 m/s. the kinematic viscosity of the air is 14.66 x 10-6 m2/s and the molecular diffusion coefficient of water vapor in the air is 0.239 x 10-4 m2/s. because the cave diameter is so large, the flow of wind down the length of the cave, in the x direction, can be treated like it is external flow and the cave surface can be approximated as flat where appropriate. calculate the x value, in a) the transition to turbulent flow occurs at rex meters, where the air flow transitions from laminar to turbulent along the inside surface of the cave b) calculate the x value, in meters, where the bulk steady state concentration of water vapor in the air flowing in the cave is 10% of the saturation concentration. assume the air at the surface of the water layer is 100% saturated with water vapor. assume the wind entering the cave contained no moisture before it entered the cave. take into account the transition from laminar to turbulent flow when solving part b