I have a voltage source of 12V but a light that only burns at 5V. The lamp works on 18 mA. Calculate the resistance that you EXTRA have to include in this series connection.

The resistance that will provide this potential drop is 388.89 ohms.

Explanation:

Given;

Voltage source, E = 12 V

Voltage rating of the lamp, V = 5 V

Current through the lamp, I = 18 mA

Extra voltage or potential drop = 12 V - 5 V = 7 V

The resistance that will provide this potential drop (7 V) is calculated as follows:

Therefore, the resistance that will provide this potential drop is 388.89 ohms.

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation:

falling water hydro = water .. spectcular places these plants are