Using a material that is "Ohmic" (follows Ohm’s law), you make a circuit using wire, a battery, and a resistor. After measuring V, I, and R across the circuit, you switch out the original resistor with one that is three times more resistive. When you measure V, I, and R again, how will the new values compare to the original measurements?

The place you get your hair cut has two nearly parallel mirrors 6.00 m apart. as you sit in the chair, your head is 2.00 m from the nearer mirror. looking toward this mirror, you first see your face and then, farther away, the back of your head. (the mirrors need to be slightly nonparallel for you to be able to see the back of your head, but you can treat them as parallel in this problem.) how far away does the back of your head appear to be?

Acrow drops a 0.11kg clam onto a rocky beach from a height of 9.8m. what is the kinetic energy of the clam when it is 5.0m above the ground? what is its speed at that point?

The frequency of vibrations of a vibrating violin string is given by f = 1 2l t ρ where l is the length of the string, t is its tension, and ρ is its linear density.† (a) find the rate of change of the frequency with respect to the following. (i) the length (when t and ρ are constant) (ii) the tension (when l and ρ are constant) (iii) the linear density (when l and t are constant) (b) the pitch of a note (how high or low the note sounds) is determined by the frequency f. (the higher the frequency, the higher the pitch.) use the signs of the derivatives in part (a) to determine what happens to the pitch of a note for the following. (i) when the effective length of a string is decreased by placing a finger on the string so a shorter portion of the string vibrates df dl 0 and l is ⇒ f is ⇒ (ii) when the tension is increased by turning a tuning peg df dt 0 and t is ⇒ f is ⇒ (iii) when the linear density is increased by switching to another string df dρ 0 and ρ is ⇒ f is ⇒