he scientific unit of measurement used to measure the dose received from radiations, such as X-rays or background radiation, is the millisievert (mSv). The table shows the X-ray dose resulting from CT scans of various parts of the body. The table also shows the time it would take to get the same dose from background radiation. Part of the body X-ray dose in mSv Time it would take to get the same dose from background radiation Abdomen 9.0 3 years Sinuses 0.5 2 months Spine 4.0 16 months A student suggests that the X-ray dose and the time it would take to get the same dose from background radiation are directly proportional. Use calculations to test this suggestion and state your conclusion.

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

As a car drives with its tires rolling freely without any slippage, the type of friction acting between the tires and the road is 100) a) static friction. b) kinetic friction. c) a combination of static and kinetic friction. d) neither static nor kinetic friction, but some other type of friction. e) it is impossible to tell what type of friction acts in this situation.

Debbie places two shopping carts in a cart corral she pushes the first cart which then pushes a second cart what force is being exerted