Physics, 19.01.2021 19:40 ronni386re

Imagine you are an auto designer. Your job is to design brakes for different automobiles. Explain what you need to consider about momentum when designing brakes for a heavy truck, a small car, and a van.

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 12:00

Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.

Answers: 1

Answer

Physics, 22.06.2019 15:40

How does the electric potential energy between two charged particles change if one particle is reduced by a factor of 3? a. increased by a factor of 3 b. it is decreased by a factor of 9 c. it is reduced by a factor of 3 d. it is increased by a factor of 9

Answers: 1

Answer

Physics, 22.06.2019 18:10

Arefrigerator uses r-134a as the working fluid and operates on the ideal vapor-compression refrigeration cycle except for the compression process. the refrigerant enters the evaporator at 120 kpa with a quality of 34 percent and leaves the compressor at 70°c. if the compressor consumes 450 w of power, determine (a) the mass flow rate of the refrigerant, (b) the condenser pressure, and (c) the cop of the refrigerator. (0.00644 kg/s, 800 kpa, 2.03)

Answers: 1

Answer

Physics, 22.06.2019 20:20

An electron is trapped at a defect in a crystal. the defect may be modeled as a one-dimensional, rigid-walled box of width 1.00 nm. (a) sketch the wavefunctions and probability densities for the n 1 and n 2 states. (b) for the n 1 state, nd the probability of nding the electron between x1 0.15 nm and x2 0.35 nm, where x 0 is the left side of the box. (c) repeat (b) for the n 2 state. (d) calculate the energies in electron volts of the n 1 and n 2 states

Answers: 1

Answer

You know the right answer?

Imagine you are an auto designer. Your job is to design brakes for different automobiles. Explain wh...

Questions