A potter's wheel moves from rest to an angu- lar speed of 0.10 rev/s in 24.6 s.
Assuming constant angular acceleration.
what is its angular acceleration in rad/s?
Answer in units of rad/s

angular acceleration =final angular speed + initial angular speed

                                                                     time

                                  =0.6283rad/s +0

                                            24.6s

                                   =0.6283/24.5

                                   =0.025rad/s^2

Explanation:

first angular speed is equal to angular velocity and we will convert the unit to rad/s so 1rev/sec=6.283rad/s then angular acceleration is the rate at which the angular velocity changes with the time we have the final angular velocity,initial angular velocity and time now substitute the numbers in the formula and the value will be 0.025 rad per seconde square

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water

answer: the metamorphic rocks are formed when they are exposed to high pressure and high temperatures. this happens when one of the earth's plates comes in contact with the other plate by traveling in opposite directions, straight into each other or slipping under one another. the friction that is caused by this activity results in   melting of rocks and when it cools they are known as metamorphic rocks. this process needs a controlled amount of pressure and temperature otherwise it may turn into magma.