During an automobile crash test, the average force exerted by a solid wall on a 1,700 kg car that hits the wall is measured to be 170,000 N over a 0.14 s time interval. What was the initial speed of the car (in m/s) prior to the collision, assuming the car is at rest at the end of the time interval

Zeros that follow non-zeros numbers and are also to the right of a decimal point are significant

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Acar starts from rest at a stop sign and reaches a velocity of 25 m/s w in 4 seconds. determine the acceleration of the car. question 3 options: a) 6,25 m/s2 b)6.25 m/s c)100 m/s2 d)100 m/s