A 3.0-kg block is dragged over a rough horizontal surface by a constant force of 16 N acting at an angle of 37° above the horizontal as shown. The speed of the block increases from 2 m/s to 3.8 m/s in a displacement of 5.5 m. What work was done by the friction force during this displacement?

1) what is the power in horsepower of a 100 watt light bulb? what is the power in kilowatts of a 200 horsepower engine? 2) if a cars engine is providing 3000 n of force to keep the car moving at 5 m/s, what is the engine’s effective power? 3) how many gallons of water will be pumped from a well 30 feet deep by a 1/2 hp engine in 1 minute? (1 gallon weighs 8.34 pounds)

3. a worker pushes a 30.5 kg polished stone along a polished table with a force on bonin a straight line for 5.20 s after starting from rest. there is no friction between thestone and the table. at the end of the table. the stone is hooked to a cable with a lengthof 62.0 cm to rotate it to a rough table to store until they can be picked up. the roughtable has a coefficient of static friction 0.702 with the polished stone. remember that 8= 9.80 m/s2a) what is the speed of the stone when it is hooked to the cable? b) what is the tension in the cable while the stone is rotating? (there is still nofriction)c) how much force is needed to make the stone begin sliding from rest on therough table? ius = 0.70262.0 cm30.5 kg20.5 kg6= 0

Which wave is the result of amplification and produces a louder sound