Forces that are equal in strength an opposite in direction are

Golf is for old men who smell

Ohm's law tells you that i = v/r where v is equivalent voltage and r is equivalent resistance of the circuit
since all circuits have the same voltage, your question is really asking which circuit has the lowest total resistance, since the lower the resistance, the higher the current
circuit a has a resistance of 5 ohms; circuit c is in series so has a resistance of 10 ohms; circuit b is in parallel and therefore has a resistance of 2.5 ohms (review your notes on adding resistances in parallel and series); therefore b has the highest current

The chemical reactions lab we did is typically called a "copper plating lab,  because the acid solution cleaned the pennies and made the copper look shinier;   the acid solution cleaned the paperclips and made them look like pennies;   &   the copper from the pennies was removed, and then added to the paperclips. 

To compare speeds speeds of wagons we will use second newton's law. it states: f = m * ahere we can see that force depends on the acceleration. if we know acceleration for both wagons we can compare them to make conclusion of speeds of wagons.we have: m1 = 10lbm2 = 20lbf1 = 2*f2also: m2 = 2*m1for bill we have equation: f1 = m1 * a1for tom we have equation: f2 = m2 * a2after inserting identities we have: 2*f2 =m1 * a1f2 = 2*m1 * a2in order to make conclusions about speeds we will solve these equations for a and find their ratio: a1 = 2f2 / m1a2 = f2 / 2m1a1 / a2 = (2f2/m1) / (f2/2m1)a1 / a2 = (2f2*2m1) / (m1*f2)a1 / a2 = (4f2m1) / (m1f2)a1 / a2 = 4this ratio is bigger than 1 and this means that a1 is greater than a2. a1 is 4 times greater than a2. speed of bill's wagon is 4 times greater than speed of tom's wagon.