subject
Physics, 04.11.2020 22:50 moowalden1239

.If a current of 5 Amperes flows through the conductor. The number of electrons per second will be: 1. 7.68 x 1020
2. 1.6 x 10-19
3. 3.12 x1019
4. 4 x 1019

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 17:00
Ajogger accelerates from rest to 4.86 m/s in 2.43 s. a car accelerates from 20.6 to 32.7 m/s also in 2.43 s. (a) find the magnitude of the acceleration of the jogger. (b) determine the magnitude of the acceleration of the car. (c) how much further does the car travel than the jogger during the 2.43 s?
Answers: 2
question
Physics, 21.06.2019 17:00
Heat from the sun reaches earth to a. radiation b. convection c. conduction
Answers: 2
question
Physics, 21.06.2019 22:00
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
question
Physics, 22.06.2019 10:40
As you are trying to move a heavy box of mass m, you realize that it is too heavy for you to lift by yourself. there is no one around to , so you attach an ideal pulley to the box and a massless rope to the ceiling, which you wrap around the pulley. you pull up on the rope to lift the box. use g for the magnitude of the acceleration due to gravity and neglect friction forces. once you have pulled hard enough to start the box moving upward, what is the magnitude f of the upward force you must apply to the rope to start raising the box with constant velocity? express the magnitude of the force in terms of m, the mass of the box.
Answers: 1
You know the right answer?
.If a current of 5 Amperes flows through the conductor. The number of electrons per second will be:...
Questions
question
Mathematics, 28.08.2019 05:00
Questions on the website: 13722363