An FCC crystal is pulled in tension along the [100] direction. (a) Knowing that slip systems will include planes in {111} and directions in <110>, show how you confirmed which combinations of planes and directions can be slip systems (b) Determine the Schmid factor for all slip systems. (c) Identify the slip system(s) that will be activated first. (d) What is the tensile stress at which this crystal will flow plastically? (τCRSS = 50 MPa.)

The man fires an 80 g arrow so that it is moving at 80 m/s when it hits and embeds in a 8.0 kg block resting on ice. how far will the block slide on the ice before stopping? a 7.1 n friction force opposes its motion.

Ann walks 80 meters on a straight line 33 ∘ north of east starting at point 1. draw ann's path. represent ann's walk with a vector of length 80 meters. draw the vector starting at point 1. the length given in the display is in meters.

Two horizontal plates with infinite length and width are separated by a distance h in the z direction. the bottom plate is moving at a velocity u. the incompressible fluid trapped between the plates is moving in the positive x-direction with the bottom plate. align gravity with positive z. assume that the flow is fully-developed and laminar. if the systems operates at steady state and the pressure gradient in x-direction can be ignored, do the following: 1. sketch your system 2. identify the coordinate system to be used. 3. show your coordinates and origin point on the sketch. list all your assumptions. 5. apply the continuity equation to your system. nts of navier stokes equations of choice to your system 7. solve the resulting differential equation to obtain the velocity profile within the system make sure to list your boundary conditions. check units of velocity 8. describe the velocity profile you obtain using engineering terminology. sketch that on the same sketch you provided in (1). 9. obtain the equation that describes the volumetric flow rate in the system. check the units.