Arrange the rock layers from oldest to youngest. Reexamine the rock outcrops if you need to. Record the order in the Student Guide.
TOOLS
youngest
Breccia
Conglomerate
Age
Dolostone
Shale
oldest

Welll if it’s youngest to older sit would be Conglomerate, Breccia, Shale, Dolostone. So that means that oldest to youngest would be Dolostone, Shale, Breccia, Conglomerate.

from top (youngest) to bottom (oldest) -

Conglomerate

Brecca

Shale

Dolostone

Explanation:

got it wrong from the person above and then it said this the right answer lol.

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

you cant move and you feel like someones pushing you down onto your bed it can feel like you want to get up but you just can't it can be extremely scary