Physics, 08.10.2020 18:01 emmilee94

A long wire of diameter D= 1 mm is submerged in an oil bath of temperature [infinity] T[infinity]= 15°C. The wire has an electrical resistance per unit length of Re′= 0.01 Ω/m. If a current of I= 96 A flows through the wire and the convection coefficient is h= 500 W/m2·K, what is the steady-state temperature of the wire? From the time the current is applied, how long does it take for the wire to reach a temperature that is within 1°C of the steady-state value? The properties of the wire are rho= 8000 kg/m3, c= 500 J/kg·K, and k= 20 W/m·K.

Answers: 3

Show answers

Another question on Physics

Physics, 22.06.2019 06:20

Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?

Answers: 1

Answer

Physics, 23.06.2019 02:00

How many electrons does each element require in its valence shell to become stable?

Answers: 1

Answer

Physics, 23.06.2019 02:00

Two models of the same compound are shown. in what way is model b better than model a? model b shows the types of elements in the compound, but model a does not. model b shows the three-dimensional shape of the molecule, but model a does not. model b shows how the atoms in the molecule are connected, but model a does not. model b shows the number of atoms of each element in the molecule, but model a does not

Answers: 1

Answer

Physics, 23.06.2019 02:10

Which best describes the weak nuclear force? it maintains attraction between the m ecules in liquids. it attracts the nucleus of one atom to the nucleus of another atom. it pulls all matter in the universe together it keeps particles that make up protons and neutrons together

Answers: 1

Answer

You know the right answer?

A long wire of diameter D= 1 mm is submerged in an oil bath of temperature [infinity] T[infinity]= 1...

Questions