Physics, 28.09.2020 19:01 kimlyn58p0wyn0

A student catches a can of soda dropped from some unknown height by Mr. Fineman. If the can was dropped from rest, and it is traveling at 8.9 m/s before it arrives in the student's hand...
a. How long was the can in free fall for?
b. From what height was the can of soda dropped?

Answers: 1

Show answers

Answers

Answer from: Quest

answer: option c. i.e. electric current flowing “downhill” from the negative electrode to the positive electrode in a battery

explanation:

the water analogy to the circuits define the pipes (water flows) to the electric current. now, we know that the electric current flows from the positive terminal to the circuit (as shown in the diagram attached).

hence, option c is the correct answer.

Answer from: Quest

force is based upon mass and acceleration.the statement is not always true.

it can be explained from newton's second law of motion.

as per newton's second law of motion the rate of change of momentum is directly proportional to the applied force and takes place along the direction of force.

mathematically it can be written as -

$f\alpha \frac{dp}{dt}$

⇒ $f= k \frac{dp}{dt}$

here k is the proportionality constant whose value is 1.

$f=\frac{dp}{dt}$

$f= \frac{d[mv]}{dt}$

$f= m\frac{dv}{dt} +v\frac{dm}{dt}$

$f=ma+v\frac{dm}{dt}$ [a is the acceleration=dv/dt]

hence we see that force not only depends on mass and acceleration but also on velocity and rate of change of mass. force f will depend on mass and acceleration only when mass is constant.

hence the statement that force is based upon mass and acceleration is false.

Answer from: Quest

Ibelieve the answer is arteries

Answer from: Quest

M= 700 kgvalue of g( gravity) is constant = 9.8 m/s² or 10 m/s² w = mg = 700*9.8 = 6860n or 6.680*10³ n

Another question on Physics

Physics, 21.06.2019 23:10

A248-g piece of copper is dropped into 390 ml of water at 22.6 °c. the final temperature of the water was measured as 39.9 °c. calculate the initial temperature of the piece of copper. assume that all heat transfer occurs between the copper and the water. remember, the density of water is 1.0 g/m

Answers: 1

Answer

Physics, 21.06.2019 23:30

If 21.2 kcals of energy is released by this reaction, how many kj does the reaction release? (1 cal 4.184 j)

Answers: 1

Answer

Physics, 22.06.2019 01:30

For problems 1-3, consider a simple dc brush motor with a permanent magnet stator. with an an consider a simple dc brush motor with a permanent magnet ae supply voltage of 100 v, the no-load speed of the motor is 1000 rpm. this motor can provide a torque of 1.9 n-m at 800 rpm drawing a current of 2 a current are both zero at no load.) 1. with an armature supply voltage of 100 v, the motor is operated at 900 rpm. what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input? what is the energy efficiency of the motor? with an armature supply voltage of 100 v, the motor is operated at 1100 rpm (where it acts as a generator). what torque input is required? what mechanical power is required what current is generated? what is the electrical power generated? what is the energy efficiency of the motor acting as a generator? 2. with an armature supply voltage raised to 120 v, the motor is operated at 1000 rpm. what is the no-load speed? what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input what is the energy efficiency of the motor? 3.

Answers: 3

Answer

Physics, 22.06.2019 05:30

Iwill give 30 points to whoever answers ! what is the formula for actual mechanical advantage and ideal mechanical advantage?

Answers: 1

Answer

You know the right answer?

A student catches a can of soda dropped from some unknown height by Mr. Fineman. If the can was dro...

Questions