subject
Physics, 12.08.2020 22:01 paolacorazza

An accident occurred in which Driver 1 turned right from Post Road onto the eastbound lane of Route 460. Driver 2 was approaching this same intersection on Route 460, traveling east. Driver 2 swerved left to avoid hitting Driver 1, passing driver 1, and then stopping ahead of driver 1. Driver 1 passed the now stopped car of Driver 2 and pulled onto the shoulder off Route 360 east of Driver 2. Police arrived, and details for the accident were gathered. Site Evidence
Driver 1’s car stopped a distance of 325 feet east of Post Road. Driver 1 stopped 50 feet east of Driver 2’s car. Driver 1’s car was a 2018 Jeep Grand Cherokee. Driver 2’s car was a 2018 Honda Fit.
Road conditions were dry. The road at this point is straight and level. No other cars were affected by the incident.
Driver Statements
Driver 1’s version: Driver 1 said he pulled out while Driver 2 was still some distance west of the intersection and that Driver 1 had accelerated to 50 MPH before Driver 2 swerved around him, evidently going well over the speed limit for Route 460, which is 60 MPH. Had Driver 2 not been speeding, he would have been able to slow and not swerve.
Driver 2’s version: Driver 2 said he was driving at 60 MPH, and Driver 1 pulled onto Route 460 when Driver 2 was only two car lengths from the intersection, forcing Driver 2 to swerve to avoid a collision. Driver 1 had barely started to accelerate and could not have been going 50 MPH when Driver 2 had to swerve around Driver 1. He started his swerve one car length behind Driver 1 and started to stop when he was one car length in front of Driver 1.
Additional Information:
Based on a test of acceleration for all vehicles, a 2018 Jeep Grand Cherokee model can accelerate from zero to 60 MPH in 8.6 seconds.
Based on tests of stopping distance, the Honda Fit can brake from 60 MPH to a stop in a distance of 131 feet.
Consider a car length to be 15 feet.
It may be useful to do calculations in units of feet/second rather than miles/ hour. The conversion rate is 1 MPH = 1.467 ft/s so 50 mph = 73.3 ft/s and 60 mph = 88 ft/s.
1. Calculate the acceleration rate of the Jeep Grand Cherokee in feet/second/second or ft/s2.
2. Calculate how much time Driver 1 would take to reach 50 mph (73.3 ft/s) while accelerating at the rate determined in part 1. Remember that the acceleration rate represents how much the speed increases each second.
3. Next we need to figure out how far the car would travel while accelerating at this rate (part 1) for this amount of time (part 2). You have the data you need. Find the right equation and solve.
4. Now it’s time to evaluate the two driver's stories. If driver 2 passed driver 1 after driver 1 accelerated to 50 mph (73.3 ft/s), he would have to have started his deceleration farther down the road from the intersection than the distance calculated in part 3. Add the estimated stopping distance for driver 2’s car to the result of part 3 above. What is this distance?
5. Which driver’s account do you believe and why?

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 11:00
Which of the following are guidelines to follow for obtaining accurate observations
Answers: 2
question
Physics, 22.06.2019 21:50
As microwave light travels through a liquid, it moves at a speed of 2.2 x 108 m/s. if the frequency of this light wave is 1.1 x 108 hz, what is the wavelength of this microwave?
Answers: 2
question
Physics, 23.06.2019 00:00
You are a researcher for a golf club manufacturer. you are given two identical looking cubes of a metal alloy. you are informed that they are made of the exact same material, but one is crystalline, whereas the other is amorphous. it is your job to determine which one is amorphous this one is more stress-resistant and is useful in reinforcing golf clubs. which of the following is the best way to determine which is which? a. determine the density of each cube. the more dense one is the amorphous solid. b. melt both cubes and look for a broader range of melting temperatures. the one that melts over a broader range of temperatures is the amorphous solid. c. determine the density of each cube. the less dense cube is the amorphous solid. d. melt both cubes and measure the range of melting temperatures. the one that melts over a narrower range of temperatures is the amorphous solid.
Answers: 1
question
Physics, 23.06.2019 01:00
What happens when the number of protons in an atom changes
Answers: 1
You know the right answer?
An accident occurred in which Driver 1 turned right from Post Road onto the eastbound lane of Route...
Questions
question
Mathematics, 05.03.2020 23:38
Questions on the website: 13722367