You should have observed that there are some frequencies where the output is stronger than the input. Discuss how that is even possible from a conservation of energy standpoint. Also, can you relate this behavior to the transient (natural) response of the circuit that you observed in the previous lab

w = √ 1 / CL

This does not violate energy conservation because the voltage of the power source is equal to the voltage drop in the resistence

Explanation:

This problem refers to electrical circuits, the circuits where this phenomenon occurs are series RLC circuits, where the resistor, the capacitor and the inductance are placed in series.

In these circuits the impedance is

             X = √ (R² +  ( -)² )

where Xc and XL is the capacitive and inductive impedance, respectively

            X_{C} = 1 / wC

           X_{L} = wL

From this expression we can see that for the resonance frequency

           X_{C} = X_{L}

the impedance of the circuit is minimal, therefore the current and voltage are maximum and an increase in signal intensity is observed.

This does not violate energy conservation because the voltage of the power source is equal to the voltage drop in the resistence

               V = IR

Since the contribution of the two other components is canceled, this occurs for

                X_{C} = X_{L}

                1 / wC = w L

                w = √ 1 / CL

gets less