1.The electric field strength between two parallel plates separated by 6.00 cm is 7.50 × 104 V/m . (a) What is the potential difference between the plates? (b) The plate with the lowest potential is taken to be zero volts. What is the potential 1.00 cm from that plate and 6.00 cm from the other?

a)4500V

b)750V

Explanation:

Given:

Distance between the plate=

6.00 cm

We need to convert to m

Then the Distance between the plate=

0.06m

electric field strength between two parallel plates =

7.50 × 104 V/m .

Then E= 7.50 × 104 V/m .

(a) What is the potential difference between the plates?

potential difference between the plates can be calculated using the formula below

Δ Vab=ED

Where E is the given electric field strength

D= The Distance between the plate

ΔVab=7.50 × 10⁴V/m ×

0.06m

= 4500V

(b) The plate with the lowest potential is taken to be zero volts. What is the potential 1.00 cm from that plate and 6.00 cm from the other?

the potential 1cm from the zero volt plate

Then the 1cm must be converted to m

= 0.01m

Let us say plate A as the plate at 0 volts:

The potential increases linearly going from plate A (0 V) to plate B (4500V).

Therefore,if the potential difference between A and B, separated by 6 cm, is 4500 V, then the potential difference between A and a point located at 1 cm from A is can be calculated also

If the plate with Lowest potential is taken to be zero then

=ΔVab=Vab-Vb=Va-0=Va=ED

Va=7.50 × 10⁴V/m × 0.01=750V

probably not if net force is zero

-first use of geothermal energy occurred more than 10,000 years ago in north america by american paleo-indians

-the first industrial use of geothermal energy began near pisa, italy in late 18th century

-in 1904, italian scientist piero ginori conti invented the first geothermal electric power plant in which steam was used to generate the power

-with the above experiment, the first geothermal plant in usa started in 1922 with a capacity of 250 kilowatts

-however, in 1946 first ground-source geothermal heat pump installed at commonwealth building in portland, oregon

-during the 1960’s, pacific gas and electric began operation of first large scale geothermal power plant in san francisco, producing 11 megawatts

-in 1973, when oil crisis began many countries began looking for renewable energy sources and by 1980’s geothermal heat pumps (ghp) started gaining popularity in order to reduce heating and cooling costs

-as effect of climate change started showing results, governments of various countries joined hands to fight against it, for which kyoto protocol was signed in japan in 1997, laid out emission targets for rich countries and required that they transfer funds and technology to developing countries, 184 countries have ratified it

hope this