Physics, 23.07.2020 04:01 Derrielle6451

What will be the resistance Rstretched of the wire if it is stretched to twice its original length? Assume that the density and resistivity of the material do not change when the wire is stretched.

Answers: 3

Show answers

Answers

Answer from: dassiekeaton

If the wire is stretched to twice its original length, the new resistance would be quadrupled.

The resistance (R) of a wire is given by:

$R=\rho\frac{L}{A} \\\\where\ L\ is\ length\ of\ wire, A\ is\ the\ cross\ sectional\ area\ and\ \rho\ \\is\ the\ resistivity$

Since the wire is stretched, the new length (L₁) is twice its original length, hence:

L₁ = 2L

An increase in length affects the area, the new area (A₁) is:

initial volume = volume after stretch

AL = A₁L₁

AL = A₁(2L)

A₁ = A/2

The resistance of the stretched wire (R₁) is:

$R_1=\rho\frac{L_1}{A_1} \\\\R_1=\rho\frac{2L}{A/2} \\\\R_1=4\rho\frac{L}{A}=4R$

Therefore if the wire is stretched to twice its original length, the new resistance would be quadrupled.

Find out more at: link

Answer from: irlanda20

Hence, the resistance of the stretched wire will be four times that of the original wire.

Explanation:

The resistance of a material is expressed as R = ρL/A

Volume of the original material V = Area * Length = A*L

ρ is the resistivity of the material

R is the resistance

A is the cross sectional area

L is the length of the wire.

If the wire is stretched o twice its original length then new length of the wire L₂ = 2L. Note that an increase in the length of wire will affect its area but its volume and density will not change.

This means V = V₂

A*L = = A₂*L₂

A*L = A₂*(2 L)

A = 2 A₂

A₂ = A/2

The new resistance of the material Rf = ρL₂/A₂

R₂ = ρ(2 L)/(A/2)

Rf = 2ρL * 2/A

Rf = 4(ρL/A)

Since R = ρL/A

R₂ = 4R

Hence, the resistance of the stretched wire will be four times that of the original wire.

Answer from: Quest

Acetic acid /əˈsiːtɪk/, systematically named ethanoic acid /ˌɛθəˈnoʊɪk/, is a colourless liquid organic compound with the chemical formula ch3cooh (also written as ch3co2h or c2h4o2). when undiluted, it is sometimes called glacial acetic acid. vinegar is no less than 4% acetic acid by volume, making acetic acid the main component of vinegar apart from water. acetic acid has a distinctive sour taste and pungent smell. in addition to household vinegar, it is mainly produced as a precursor to polyvinyl acetate and cellulose acetate. it is classified as a weak acid since it only partially dissociates in solution, but concentrated acetic acid is corrosive and can attack the skin.acetic acidnamespreferred iupac nameacetic acidsystematic iupac nameethanoic acidother namesvinegar (when dilute); hydrogen acetate; methanecarboxylic acid[1][2]identifierscas number64-19-7 3d model (jsmol)interactive image3dmetb00009 reference506007chebichebi: 15366 chemblchembl539 chemspider171 drugbankdb03166 echa infocard100.000.528ec number200-580-7e numbere260 (preservatives)gmelin reference1380iuphar/bps1058keggd00010 meshacetic+acidpubchem cid176rtecs numberaf1225000uniiq40q9n063p un number2789inchiinchi=1s/c2h4o2/c1-2(3)4/h1h3,(h,3,4) key: qtbsbxvteameqo-uhfffaoysa-n smilescc(o)=o

Answer from: Quest

more than, less

less than, more

Another question on Physics

Physics, 21.06.2019 19:10

Athin, square metal plate measures 14 cm on each side and has emissivity of 0.60. the plate is heated to a temperature of 745°c. what is the rate at which the plate radiates energy ? the stefan-boltzmann constant is 5.67 × 10-8 w/(m2 ? k4). remember that the plate will radiate energy from both its top and bottom surfaces.

Answers: 1

Answer

Physics, 22.06.2019 04:30

Asystem containing an ideal gas at a constant pressure of 1.22×10^5 pa gains 2140 j of heat. during the process, the internal energy of the system increases by 2320 j. what is the change in volume of the gas?

Answers: 3

Answer

Physics, 22.06.2019 12:00

Ihave a density of 1.61g/cm^3 and a mass of 28g. find the missing value

Answers: 1

Answer

Physics, 22.06.2019 20:20

Consider a file currently consisting of 200 blocks. assume that the file control block (and the index block in the case of indexed allocation) is already in memory. calculate how many disk i/o operations are required for contiguous, linked, and indexed (single-level) allocation strategies, for each of the conditions listed below. in the contiguous-allocation case, assume that there is not room to grow at the beginning but there is room to grow at the end. also assume that the block information to be added is stored in memory.

Answers: 3

Answer

You know the right answer?

What will be the resistance Rstretched of the wire if it is stretched to twice its original length?...

Questions