subject
Physics, 02.07.2020 02:01 sheyenne143

A rope is being used to pull a mass of 10 kg vertically upward. Determine the tension or he rope, if starting from rest, the mass acquires a velocity of 4 ms'in 8s (g=10ms'l

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 02:00
Askydiver weighing 140 lb (including equipment) falls vertically downward from an altitude of 19,000 ft and opens the parachute after 18 s of free fall. assume that the force of air resistance, which is directed opposite to the velocity, is of magnitude 0.55|v| when the parachute is closed and is of magnitude 14|v| when the parachute is open, where the velocity v is measured in ft/s. assume that acceleration due to gravity has magnitude 32 ft/s/s; remember that weight is the product of mass and gravitational acceleration. (a) find the speed of the skydiver when the parachute opens. (b) find the distance fallen before the parachute opens. (c) what is the limiting velocity vl after the parachute opens? (d) determine how long the sky diver is in the air after the parachute opens. (e) plot the graph of velocity versus time from the beginning of the fall until the skydiver reaches the ground.
Answers: 1
question
Physics, 22.06.2019 22:10
Astep up transformer has 250 turns on its primary and 500 turns on it secondary. when the primary is connected to a 200 v and the secondary is connected to a floodlight that draws 5a, what is the power output? show all of your work.
Answers: 1
question
Physics, 23.06.2019 07:10
Atoy airplane, flying in a horizontal, circularpath, completes 10. complete circles in 30.seconds. if the radius of the plane’s circular pathis 4.0 meters, the average speed of the airplane is(1) 0.13 m/s (3) 1.3 m/s(2) 0.84 m/s (4) 8.4 m/s
Answers: 3
question
Physics, 23.06.2019 08:30
Industrial processes often require the damping of vibrations. consider a workbench that uses four large ideal springs in place of traditional legs, with each spring supporting one corner of the workbench and exhibiting a force constant of 47500 n/m. this workbench is used when creating products that involve highly unstable chemicals. according to specifications, the acceleration of the manufacturing equipment must be held to less than 22.3 m/s2 for the manufacturing process to proceed safely. the amplitude of vibrations are expected to remain under 0.622 mm throughout. given that the workbench and maufacturing equipment combine to 6.05 kg, find the maximum acceleration expected of the equipment and workbench. (ignore the mass of the springs.)
Answers: 2
You know the right answer?
A rope is being used to pull a mass of 10 kg vertically upward. Determine the tension or he rope, i...
Questions
question
Mathematics, 30.08.2019 04:20
question
Physics, 30.08.2019 04:20
Questions on the website: 13722362