subject
Physics, 27.06.2020 15:01 ijustneedhelp29

A portable x-ray unit has a step-up transformer. The 120 V input is transformed to the 100 kV output needed by the x-ray tube. The primary has 47 loops and draws a current of 16 A when in use. What is the current output of the secondary in milliAmpere

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 21:30
Apendulum has a mass of 1.5 kg and starts at a height of 0.4 m. if it is released from rest, how fast is it going when it reaches the lowest point of its path? acceleration due to gravity is g = 9.8 m/s2. a. 2.8 m/s b. 0 m/s c. 5.9 m/s d. 4.3 m/s
Answers: 1
question
Physics, 22.06.2019 03:00
An internally reversible refrigerator has a modified coefficient of performance accounting for realistic heat transfer processes of where qin is the refrigerator cooling rate, qout is the heat rejection rate, and is the power input. show that copm can be expressed in terms of the reservoir temperatures tc and th, the cold and hot thermal resistances rt,c and rt,h, and qin, as where rtot rt,c rt,h. also, show that the power input may be expressed as 1.39 a household refrigerator operates with cold- and hot-temperature reservoirs of tc 5 c and th 25 c, respectively. when new, the cold and hot side resistances are rc,n 0.05 k/w and rh,n 0.04 k/w, respectively. over time, dust accumulates on the refrigerator’s condenser coil, which is located behind the refrigerator, increasing the hot side resistance to rh,d 0.1 k/w. it is desired to have a refrigerator cooling rate of qin 750 w. using the results of problem 1.38, determine the modified coefficient of performance and the required power input w under (a) clean and (b) dusty coil conditions. internally reversible refrigerator qout qin w high-temperature reservoir low-temperature reservoir th th,i tc,i tc high-temperature side resistance low-temperature side resistance w qin th tc qinrtot tc qinrtot copm tc qinrtot th tc
Answers: 2
question
Physics, 23.06.2019 04:40
2) a cubical block of stone is lowered at a steady rate into the ocean by a crane, always keeping the top and bottom faces horizontal. which one of the following graphs best describes the buoyant force b on this block as a function of time t if the block just enters the water at time t = 0 s?
Answers: 3
question
Physics, 23.06.2019 06:00
The precision of a voltmeter is ±0.005 v. the accepted value for a measurement is 9.016 v. which measurement is in the accepted range? 9.005 v 9.006 v 9.018 v 9.025 v
Answers: 1
You know the right answer?
A portable x-ray unit has a step-up transformer. The 120 V input is transformed to the 100 kV output...
Questions
question
Mathematics, 26.06.2019 03:00
question
English, 26.06.2019 03:00
Questions on the website: 13722359