A built-in-end cantilever support is replaced with what reaction force(s) when a free body diagram is being drawn.
A.) A reaction force in the X axis
B.) A moment force
C.) All of these
D.) None of these
E.) A reaction force in the Y axis

Option B and E

A moment force

Reaction in the Y axis

Explanation:

A built-in-end cantilever support is one which has one end fixed into a wall. This makes it rigid and immovable in the x direction.

Cantilevers are usually loaded in the y-direction, and this usually sets up the following:

1. Rotation reactions: This is because the load is applied a distance away from the support, in a direction that is perpendicular to the length of the beam. This sets up a rotational force on the beam. and consequently, a rotational reaction at the support ( A moment force)

2. Reaction forces in the Y axis: The mere fact that it is usually loaded in the y - axis, by Newton's third law, there will always be reaction forces set up in the y- direction at the support.

Note: No reactions in the x axis are set up here, because loading on built-in-end cantilever support is usually vertical.

Hence, option B and E are correct.

answer: the metamorphic rocks are formed when they are exposed to high pressure and high temperatures. this happens when one of the earth's plates comes in contact with the other plate by traveling in opposite directions, straight into each other or slipping under one another. the friction that is caused by this activity results in   melting of rocks and when it cools they are known as metamorphic rocks. this process needs a controlled amount of pressure and temperature otherwise it may turn into magma.

answergravity;