Se dispone de dos vasos con agua a 20 grados y queremos calentarlo hasta alcanzar 50 grados. Si el primero contiene 0,5l y el segundo, 750ml, cual de los dos requerirá mas cantidad para alcanzar la temperatura deseada? Porque?

The cup with 0.5L

Explanation:

To know what amount of water you take into account the specific heat of the water. The specific heat of water is:

Thus, 4186 J of energy are needed to icrease the temperature of 1 kg water in 1°C. Then, more grams of water will need more energy.

You have that one cup has 0.5 L and the other one has 750mL = 0.75L

The second cup of water will need more heat because the amount of water contained in the second cup is greater than in the first cup with 0.5L

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).