A typical machine tests the tensile strength of a sheet of material cut into a standard size of 5.00 centimeters wide by 10.0 centimeters long. The machine consists of one clamp that holds the entire width (5.00 centimeters) so that it hangs vertically. A second clamp is placed on the lower end of the object, to which a variable downward force is applied. The force is slowly increased until the object ruptures, and the breaking force is recorded.
A strip of aluminum foil with a thickness of 15.0 micrometers and matching the size recommendations of the machine is placed in the machine and tested. The force needed to rupture the foil is found to be 233 newtons. What is the tensile strength of the aluminum foil sample?
Answers: 1
Another question on Physics
Physics, 22.06.2019 01:40
In all trials, the magnitude of the final velocity for g1 + g2 was less than the magnitude of any initial velocity. as mass increased, what happened to the velocity? the velocity decreased. the velocity increased. the velocity of g1 + g2 could not be measured. the velocity was not affected by the mass increase.
Answers: 1
Physics, 22.06.2019 12:30
An engine undergoes a cycle as shown in the diagram. during a complete cycle the work done by the gas is 28.5×103 j and the energy transferred thermally out is 99.4×103 j. there are 1.5×1024 gas molecules and they have three active degrees of freedom. 6. (6 pts) during which process(es) is energy transferred thermally into the gas? a. 1→2 b. 2→3 c. 4→1 d. 1→2 and 4→1 e. none of the above
Answers: 3
Physics, 22.06.2019 17:30
Heterogeneous mixture with larger particles that never settle is
Answers: 2
Physics, 22.06.2019 23:40
Along wire of diameter 1 mm is submerged in an oil bath of temperature ∞ 31°c. the wire has an electrical resistance per unit length of 0.01 ω/m. if a current of 103 a flows through the wire and the convection coefficient is 500 w/m2·k, what is the steady-state temperature of the wire? from the time the current is applied, how long does it take for the wire to reach a temperature that is within 1°c of the steady-state value? the properties of the wire are 8000 kg/m3, 500 j/kg·k, and 20 w/m·k.
Answers: 3
You know the right answer?
A typical machine tests the tensile strength of a sheet of material cut into a standard size of 5.00...
Questions
History, 30.06.2019 15:30
Mathematics, 30.06.2019 15:30
Mathematics, 30.06.2019 15:30
Mathematics, 30.06.2019 15:30
History, 30.06.2019 15:30
Biology, 30.06.2019 15:30
Mathematics, 30.06.2019 15:30
