subject
Physics, 21.05.2020 05:09 Tooey6225

1. Where are the output windings on an AC generator?
a. Stator
b. Rotor with commutator
c. Rotor with slip rings
d. None of the above

2. A generator rated for 30 KVA and power factor 0.8 has a maximum power output of:
a. 30 KW
b. 24 KW
c. 48 KW
d. None of the above

3. The voltage of an AC generator:
a. Rises to max in one direction and remains constant
b. Rises to max in one direction, falls to zero and rises in the same direction
c. Rises to max in one direction then fall to zero then rises to max in the opposite direction
d. None of the above

4. Power factor of a generator is:
a. Tan Ó¨
b. Cos Ó¨
c. Sin Ó¨
d. None

5. A generator supplied 150 V AC phase and load is 10 Ohms per phase. What is the phase current?
a. 25.5 A
b. 15 A
c. 1.5 A
d. None of the above

6. An AC generator’s frequency will:
a. Be proportional to the RPM at which it is driven
b. Always be constant regardless of the generators drive speed
c. Vary with changes in field strength.
d. None of the above

7. The sum of the instantaneous EMF’s in a three phase system is:
a. Three times the phase voltage
b. Zero
c. Equal to the line voltage
d. None of the above

8. The line voltage from a generator with a delta type connection will be:
a. Lower than the phase voltage
b. The same as the phase voltage
c. Higher than the phase voltage
d. None of the above
9. Permanent magnets in an AC generator are:
a. To provide initial excitation
b. To rectify the current
c. To control the frequency
d. None of the above

10. In delta-connected generator:
a. Line voltage = root 3 ties phase voltage, line current = phase current
b. Line voltage = phase voltage, line current = root 3 times phase current
c. Line voltage = phase voltage, line current =phase current divided by root 3
d. None of the above

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 14:10
Amachinist needs to remove a tight fitting pin of material a from a hole in a block made of material b. the machinist heats both the pin and the block to the same high temperature and removes the pin easily. what statement relates the coefficient of thermal expansion of material a to that of material b? a) the situation is not possible, heating block b will shrink the hole in the material as the material expands with increasing temperatureb) material b has the same coefficient of expansion as does material ac) material b has a negative coefficient of expansion and a has a positive coefficient of expansiond) material a has a greater coefficient of expansion than does material be) material b has a greate
Answers: 1
question
Physics, 21.06.2019 21:50
Acar travels along a highway with a velocity of 24 m/s, west. the car exits the highway; and 4.0 s later, its instantaneous velocity is 16 m/s, 45° north of west. what is the magnitude of the average acceleration of the car during the four-second interval?
Answers: 2
question
Physics, 22.06.2019 11:00
A0.580-kg rock is tied to the end of a string and is swung in a circle with a radius of 0.500 meters. the velocity of the rock is 4.50 m/s. what is the centripetal force acting on the rock? 15.5 n 5.22 n 69.8 n 23.5 n
Answers: 1
question
Physics, 22.06.2019 21:30
A1500 w electric heater is plugged into the outlet of a 120 v circuit that has a 20 a circuit breaker. you plug an electric hair dryer into the same outlet. the hair dryer has power settings of 600 w, 900 w , 1200 w, and 1500 w. you start with the hair dryer on the 600 w setting and increase the power setting until the circuit breaker trips. under what setting does the circuit breaker trip.
Answers: 2
You know the right answer?
1. Where are the output windings on an AC generator?
a. Stator
b. Rotor with commutator<...
Questions
question
Mathematics, 13.11.2020 01:00
question
Computers and Technology, 13.11.2020 01:00
question
English, 13.11.2020 01:00
Questions on the website: 13722361