subject
Physics, 13.05.2020 01:57 Frankie103947

Kilogram block of ice and a temperature of -5 degrees Celsius is placed in a kilogram of water at a temperature of 25 degrees Celsius is 70 final temperature of the mixture is a specific heat capacity of ice is 2100


Kilogram block of ice and a temperature of -5 degrees Celsius is placed in a kilogram of water at a

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 23:30
Truck traveling west on the highway experiences an acceleration to the east. what could be the cause of this acceleration
Answers: 1
question
Physics, 23.06.2019 04:31
Ivana walks 2km north then turns around and walks 3km south
Answers: 1
question
Physics, 23.06.2019 05:30
If a rock weighing 54 n is submerged in a liquid with a density exactly twice that of water, what will be its new apparent weight reading in the liquid?
Answers: 3
question
Physics, 23.06.2019 08:30
Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28
Answers: 2
You know the right answer?
Kilogram block of ice and a temperature of -5 degrees Celsius is placed in a kilogram of water at a...
Questions
question
Mathematics, 20.01.2020 07:31
question
Mathematics, 20.01.2020 07:31
question
English, 20.01.2020 07:31
Questions on the website: 13722363