Calculate the first and second velocities of the car with three washers attached to the pulley, using the formulas v1 = 0.25 m / t1, and v2 = 0.25 m / (t2 – t1) where t1 and t2 are the average times the car took to reach the 0.25 and the 0.50 meter marks. Record these velocities, to two decimal places, in Table E.

Two steel balls, each of mass m, are welded to a light rod of length l and negligible mass and are initially at rest on a smooth horizontal surface. a horizontal force of magnitude f is suddenly applied to the rod as shown. determine (a) the instantaneous acceleration a of the mass center g and (b) the corresponding rate at which the angular velocity of the assembly about g is changing with time.

Which of the following types of electromagnetic radiation has the longest wavelength? a. infrared light b. visible light c. ultraviolet light d. microwaves

Irrigation channels that require regular flow monitoring are often equipped with electromagnetic flowmeters in which the magnetic field is produced by horizontal coils embedded in the bottom of the channel. a particular coil has 100 turns and a diameter of 6.0 m. when it's time for a measurement, a 4.5 a current is turned on. the large diameter of the coil means that the field in the water flowing directly above the center of the coil is approximately equal to the field in the center of the coil. the field is directed downward and the water is flowing east. the water is flowing above the center of the coil at 1.5 m/s . what is the magnitude of the field at the center of the coil? what is the direction of the force on a positive ion in the water above the center of the coil? what is the magnitude of the force on an ion with a charge +e?