A point source is fixed 1.0 m away from a large screen. Call the line normal to the screen surface and passing through the center of the point source the z axis. When a sheet of cardboard in which a square hole 0.020 m on a side has been cut is placed between the point source and the screen, 0.50 m from the point source with the hole centered on the z axis, a bright square shows up on the screen. If, instead, a second sheet of cardboard with a similar square hole is placed between the point source and screen, 0.25 m from the point source with the hole centered on the z axis, the bright square it casts on the screen is identical to the bright square from the first sheet. What is the length of the side of the hole in this sheet?

The length of the side of the hole in the second cardboard sheet is

Explanation:

From the question we are told that

     The distance of the point source  from the screen is  

      The length of a side of the  first square hole is  

      The distance of the cardboard from the point source is

   The distance of the second cardboard from the point source is

Let take the   as  the angle at which the light is passing through the edges of the cardboards square hole

     Since the bright square casted on the screen by both  square holes on the   individual cardboards are then it means that

This implies that

Looking at this from the SOHCAHTOA concept

     Here opposite is  the length of the side of the  first cardboard square hole

     and    

      Adjacent is  the  distance of the from the  first cardboard square hole to the point source

And for  

    Here opposite is  the length of the side of the  second  cardboards square hole (let denote it with )

and

Adjacent is the distance of the from the  second  cardboards square hole to the point source

         So

         And  

Substituting this into the above equation

Making the subject

Since it is a square hole the sides are the same hence

The length of the side of the hole in the second cardboard sheet is

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation:

be subject to a force andchange its motion