subject
Physics, 05.05.2020 10:49 slonekaitlyn01

A 14.0 kg sled is pullef with a 28.2 N f9rce at a 51.0° angle, acr9ss ground where uk= 0.124. What is the total force acting on the sled?

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 22:30
The of a machine determines its "usefulness." a. input force b. output force c. mechanical advantage
Answers: 2
question
Physics, 22.06.2019 01:10
Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?
Answers: 3
question
Physics, 22.06.2019 07:30
Gas cloud 1 is likely to form a star. gas cloud 2 is not. based on this information, match the given conditions with each cloud
Answers: 2
question
Physics, 22.06.2019 12:00
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
You know the right answer?
A 14.0 kg sled is pullef with a 28.2 N f9rce at a 51.0° angle, acr9ss ground where uk= 0.124. What i...
Questions
Questions on the website: 13722360