Based on the emf value measured at frame 700, what is the average magnitude of the magnetic field inside the magnet assembly? Note that the loop has 10 turns; in other words, the total emf is the sum of the emf’s generated in each turn. In your calculations, use 26 mVmV for the magnitude of the total induced emf and 0.060 m/sm/s for the speed of the loop

Aperson stands on a platform, initially at rest, that can rotate freely without friction. the moment of inertia of the person plus the platform is ip. the person holds a spinning bicycle wheel with its axis horizontal. the wheel has moment of inertia iw and angular velocity ωw. take the ωw direction counterclockwise when viewed from above. part a what will be the angular velocity ωp of the platform if the person moves the axis of the wheel so that it points vertically upward?

Atwo-stage air compressor operates at steady state, compression 10m^3/min of air from 100 kpa and 300k to 1200 kpa. an intercooler between the two stages cools the air to 300k at a constant pressure of 350 kpa. the compression processes are isentropic. a) calculate the power required to run the compressor, in kw b) compare the result to the power required for isentropic compression from the same inlet state to the same final pressure.

A250-n box is at rest on a frictionless horizotal floor. then a person shoves the box with a non-zero force of magnitude p. which statement best describes the relationship betweeen p and the motion of the box after it was shoved? -the box will not move when p< 250n but otherwise will accelerate at a constant rate that is directly proportional to p - the box will begin moving at a speed that is directly proportional to p, then will gradually slow to a halt -the box will move with constant velocity at a speed that is directly proportional to p -box will accelerate across the floor at a constant rate that is directly proportional to p