Physics, 05.05.2020 05:04 Vlonebuddy

"An uncharged 30.0-µF capacitor is connected in series with a 25.0-Ω resistor, a DC battery, and an open switch. The battery has an internal resistance of 10.0 Ω and the open-circuit voltage across its terminals is 50.0 V. The leads have no appreciable resistance. At time t = 0, the switch is suddenly closed." "When does the maximum current occur?"

Answers: 2

Show answers

Answers

Answer from: reich9357

1.04x $10^{-3}$ s

Explanation:

->The maximum current through the resistor is

$I_{max}$ = V/R = V/ $Re^{-t/RC}$ = V/R× $e^{0}$ = V/R

Voltage 'V'=50V

Effective resistance 'R'= 25.0-Ω+ 10.0 Ω= 35.0 Ω

Therefore, $I_{max}$ =50/35=> 1.43 A

->The maximum charge can be determined by

Q = CV

where,

Capacitance of the capacitor 'C' = 30.0µF = 30×10-⁶F

Therefore,

Q=30×10-⁶ x 50=>1.5 x $10^{-3}$

In order to find that when does the maximum current occur, the time taken given the quantity of charge and the electric current is:

t= Q / I=> 1.5 x $10^{-3}$ / 1.43

t= 1.04x $10^{-3}$ s

Answer from: Quest

electromagnetic shielding is the practice of reducing the electromagnetic field in a space by blocking the field with barriers made of conductive or magnetic materials. shielding is typically applied to enclosures to isolate electrical devices from their surroundings, and to cables to isolate wires from the environment through which the cable runs. electromagnetic shielding that blocks radio frequency electromagnetic radiation is also known as rf shielding.

the shielding can reduce the coupling of radio waves, electromagnetic fields and electrostatic fields. a conductive enclosure used to block electrostatic fields is also known as a faraday cage. the amount of reduction depends very much upon the material used, its thickness, the size of the shielded volume and the frequency of the fields of interest and the size, shape and orientation of apertures in a shield to an incident electromagnetic

from wikipedia

Answer from: Quest

answer: the metamorphic rocks are formed when they are exposed to high pressure and high temperatures. this happens when one of the earth's plates comes in contact with the other plate by traveling in opposite directions, straight into each other or slipping under one another. the friction that is caused by this activity results in melting of rocks and when it cools they are known as metamorphic rocks. this process needs a controlled amount of pressure and temperature otherwise it may turn into magma.

Another question on Physics

Physics, 22.06.2019 19:30

Which type of energy would have nothing to do with ironing clothes? a. heat b. chemical c. electrical d. mechanical

Answers: 1

Answer

Physics, 23.06.2019 07:00

What are the examples for scaler quantities

Answers: 2

Answer

Physics, 23.06.2019 10:40

Amajor impediment to wide acceptance of electric vehicles even on the part of people who use their cars almost exclusively for commuting is the inability to use their electric vehicles for occasional extended trips. in an attempt to make purchasing electric vehicles more attractive to commuters, one electric vehicle producer is planning to offer customers three days free rental of a conventional car for every 1,000 miles that they drive their electric vehicle. which of the following, if true, most threatens the plan's prospects for success? (a) many electric vehicles that are used for commercial purposes are not needed for extended trips. (b) because a majority of commuters drive at least 100 miles a week, the cost to the producer of making good the offer would add considerably to the already high price of electric vehicles. (c) the relatively long time it takes to recharge the battery of an electric vehicle can easily be fitted into the regular patterns of car use characteristic of commuters. (d) although electric vehicles are essentially emission-free in actual use, generating the electricity necessary for charging an electric vehicle's battery can burden the environment. (e) some family vehicles are used primarily not for commuting but for making short local trips, such as to do errands.

Answers: 3

Answer

Physics, 23.06.2019 10:40

4.at 0 ºc, some amount of energy is required to change 1 kg of water from a solid into a liquid. if you had a 2 kg piece of ice, what effect would this have on the amount of thermal energy required to change the water from a solid to a liquid? it would require more energy to change solid water into liquid water because there are more molecules in this larger piece of ice. it would still require the same amount of energy to change solid water into liquid water because the entire piece of ice would still gain the same amount of energy in each case. it would require energy to be removed from the 2 kg piece of ice. the larger piece of ice already has more total energy than the smaller piece of ice, so energy must be removed for the ice to become liquid. it would require less energy to change solid water into liquid water because the energy would spread through the ice more quickly and the ice already has a larger total amount of energy because it is larger than a 1 kg piece of ice.

Answers: 1

Answer

You know the right answer?

"An uncharged 30.0-µF capacitor is connected in series with a 25.0-Ω resistor, a DC battery, and an...

Questions