An ideal Diesel cycle has a compression ratio of 18 and a cutoff ratio of 1.5. Determine the (1) maximum air temperature and (2) the rate of heat addition to this cycle when it produces 150 hp of power, the cycle is repeated 1200 times per minute, and the state of the air at the beginning of the compression is 95 kPa and 17°C. Use constant specific heats at room temperature. The properties of air at room temperature are cp = 1.005 kJ/kg·K, cv = 0.718 kJ/kg·K, R = 0.287 kJ/kg·K, and k = 1.4.

(1) The maximum air temperature is 1383.002 K

(2) The rate of heat addition is 215.5 kW

Explanation:

T₁ = 17 + 273.15 = 290.15

T₂ = 290.15 × 3.17767 = 922.00139

Therefore,

T₃ = T₂×1.5 = 922.00139 × 1.5 = 1383.002 K

The maximum air temperature = T₃ = 1383.002 K

(2)

Therefore;

Q₁ = 1.005(1383.002 - 922.00139) = 463.306 kJ/jg

Heat rejected per kilogram is given by the following relation;

 = 0.718×(511.859 - 290.15) = 159.187 kJ/kg

The efficiency is given by the following relation;

Where:

β = Cut off ratio

Plugging in the values, we get;

Therefore;

Heat supplied =

Therefore, heat supplied = 215491.064 W

Heat supplied ≈ 215.5 kW

The rate of heat addition = 215.5 kW.

the duration of a photographic flash is related to an rc time constant, which is 0.100 μs for a certain camera.

can u provide the graph and if its not possible

then i can tell u the segment where the

average time interval starts degrading is the segment where the car is slowing down