A block is released from rest at height h0 above a vertical spring with spring constant and negligible mass. The block sticks to the spring and momentarily stops after compressing the spring 19.0 cm. How much work is done (a) by the block on the spring and (b) by the spring on the block

the box does not move because you need to use a force greater than 300 n. you are only using 50 n. it needs to at least be 301 n for the box to move because then it is an unbalanced force and it will move the way that the greater force is pushing it. if you use only 300 n it will be a balanced force and will not move because the force you are exerting on the   box is the same as its force.

hope this !

im sorry if i went too in depth, i am going to include a link to a video on khan academy that will explain this.   hope that you like the video and that it explains more in detail to you.

that is the link.

the design of a ski jumping suit involves a trade-off between giving the skiers lift to get higher jumps and ensuring the skier does not face a lot of drag before the jump itself. an expansive suit may to lift the skier higher, but at the same time, it will also increase the air resistance. higher air resistance as the skier goes down the slope limits the speed of the jump. a big suit also increases the risk of losing balance or control, especially if there's a strong gust of wind. while technologically enhanced suits a lot, clothing is not the only factor in a ski jumper’s success. gathering speed while skiing down the slope, ensuring good speed on the ramp, and maintaining good body posture and form in the air all contribute to a ski jumper's success.