A construction crew wants to hoist a heavy beam so that it is standing up straight, perpendicular with the ground. They tie a rope to the beam, secure the base, and pull the rope through a pulley to raise one end of the beam from the ground. When the beam makes an angle of 40° with the ground, the top of the beam is 8 ft above the ground. The construction site has some telephone wires crossing it. The workers are concerned that the beam may hit the wires. When the beam makes an angle of 60° with the ground, the wires are 2 ft above the top of the beam. Will the beam clear the wires on its way to standing up straight? Explain.

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation:

their crystal patterns have been disrupted by stress

true is the correct answer

hope i