Physics, 17.04.2020 03:36 mikeylaaliz9960

Suppose an automobile engine can produce 220 N⋅m of torque, and assume this car is suspended so that the wheels can turn freely. Each wheel acts like a 16.5 kg disk that has a 0.15 m radius. The tires act like 2.25-kg rings that have inside radii of 0.195 m and outside radii of 0.31 m. The tread of each tire acts like a 11-kg hoop of radius 0.345 m. The 14.5-kg axle acts like a solid cylinder that has a 1.95-cm radius. The 28-kg drive shaft acts like a solid cylinder that has a 2.9-cm radius.

calculate the angular acceleration in radians per square second, produced by the motor if 95.0% of this torque is applied to the drive shaft, axle, and rear wheels of a car.

Answers: 1

Show answers

Another question on Physics

Physics, 21.06.2019 22:00

Bernie drove home from a vacation in 1.5 hours. he traveled a total distance of 60 miles. what was his average speed in miles per hour? a. 60 mph b. 90 mph c. 40 mph d. 55mph

Answers: 1

Answer

Physics, 22.06.2019 11:30

Water is siphoned from a large tank and discharges into the atmosphere through a 50-mm diameter tube. the end of the tube is b = 2.1 m below the tank bottom which is a = 7.4 m deep, and viscous effects are negligible. determine the maximum height h over which the water can be siphoned without cavitation occurring. atmospheric pressure is 101.4 kpa, and the water vapor pressure is 1.79 kpa (absolute)

Answers: 3

Answer

Physics, 22.06.2019 13:40

Consider a double atwood machine constructed as follows: a mass 4m is suspended from a string that passes over a massless pulley on frictionless bearings. the other end of this string supports a second similar pulley, over which passes a second string supporting a mass of 3m at one end and m at the other. using two suitable generalized coordinates, set up the lagrangian and use the lagrange equations to find the acceleration of the mass 4m when the system is released. explain why the top pulley rotates even though it carries equal weights on each side.

Answers: 2

Answer

Physics, 22.06.2019 19:50

An air-filled capacitor is formed from two long conducting cylindrical shells that are coaxial and have radii of 26 mm and 103 mm. the electric potential of the inner conductor with respect to the outer conductor is - 700 v (k = 1/4πε 0 = 8.99 × 109 n · m2/c2) the energy stored in a 1.0-m length of this capacitor is closest to

Answers: 1

Answer

You know the right answer?

Suppose an automobile engine can produce 220 N⋅m of torque, and assume this car is suspended so that...

Questions