Physics, 15.04.2020 23:25 corbinfisher

A resistor, an inductor, and a switch are all connected in series to an ideal battery of constant terminal voltage. Suppose at first the switch is open, and then, at some initial time t = 0, it is closed. Which of the following statements are true? Check all that apply. Check all that apply. a.At the instant the switch is closed, the current reaches its steady-state value. b. At the instant the switch is closed, the current begins to increase at a rate that depends upon the value of the inductance of the inductor. c. The steady-state value of the current depends on the resistance of the resistor. d. The steady-state value of the current depends on the inductance of the inductor.

Answers: 2

Show answers

Another question on Physics

Physics, 22.06.2019 15:30

Can you match these to the correct definition

Answers: 3

Answer

Physics, 22.06.2019 18:30

Ben (55kg) is standing on very slippery ice when junior (25kg) bumps into him. junior was moving at a speed of 8 m/s before the collision and ben and junior embrace after the collision. find the speed of ben and junior as they move across the ice after the collision. give the answer in m/s. describe the work you did to get the answer.

Answers: 1

Answer

Physics, 22.06.2019 20:50

Asquare 1m x 1m plate is shown below. all four of its edges are kept at 0 co. at t=0the temperature distribution is given by: y xtsins n75)=.a) using separation of variables determine the temperature distribution t(x,y,t)along the plate at any time t.b) discretize the heat conduction equation +=22222 txtusing a second-order centered difference scheme for the two second derivatives and a first-order forward euler scheme for the first derivative. using von neumann stability analysis, determine the stability criterion for the proposed discretization scheme in terms of , hand t. solve for the maximum allowable time step tmax

Answers: 1

Answer

Physics, 23.06.2019 00:40

Asteel tube (k=50 w/mk) of inner and outer diameter di = 20mm and do=26mm, respectively, is used to transfer heat from hot gases flowing over the tube (h-hot = 200w/m2k) to cold water flowing through the tube (h-cold = 8000 w/m2k). what is the cold-side overall heat transfer coefficient uc? to enhance heat transfer 16 straight fins of rectangular profile are installed longitudinally along the outer surface of the tube. the fins are equally spaced around the circumference of the tube, each having a thickness of 2mm and a length of 15mm. what is the corresponding overall heat transfer coefficient uc? *solve for uc in both cases*

Answers: 1

Answer

You know the right answer?

A resistor, an inductor, and a switch are all connected in series to an ideal battery of constant te...

Questions