A 5 kg bucket is lifted from the ground into the air by pulling in 10 meters of rope with linear density of 2 kg/m at a constant speed. The bucket starts with 100 cm^3 of water and leaks at a constant rate. It finishes draining just as it reaches the 10 meter mark. How much work was spent lifting the bucket, rope, and water?

Workdone W = 1465.1 J

Explanation:

The weight of the water = density × volume

weight of the water = 1000 kg/m³ × 100 cm³

weight of the water = 1000 kg/m³ × 0.0001 m³

weight of the water = 0.1 kg

weight of the bucket  = 5 kg

weight of the rope =

=

Leakage =

=

Total  weight =

=

Force = wg

Force = ()g

Force = 9.8 ()

Finally; the amount of work spent in lifting the bucket, rope, and water is calculated as follows:

it will be pushed away from the source of the electric field. a negative charge in a cloud induces a positive charge in the ground below the cloud.

explanation:

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water