Migratory birds use Earth’s magnetic field to guide them. Some people are concerned that human-caused magnetic fields could interfere with bird navigation. Suppose that a pair of parallel high-voltage lines, each carrying a current of 100A are 3.00 meters apart and lie in the same horizontal plane. Find the magnitude and direction of the magnetic field the lines produce at a point 15.0 m above the midpoint between the two lines in each of these two cases:

Your pendulum clock which advances 1.0 s for every complete oscillation of the pendulum is running perfectly on earth at a site where the magnitude of the acceleration due to gravity is 9.80 m/s2. you send the clock to a location on the moon where the magnitude of the acceleration due to gravity is 1.65 m/s2.

Study the following reaction carefully. what classification should this reaction have? 4al + 3o2 2al2o3synthesisdecompositionsingle replacementdouble displacement

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)