Agolf ball is struck at ground level. the speed of the golf ball as a function of the time is shown in figure 4-36, where t = 0 at the instant the ball is struck. the scaling on the vertical axis is set by va=16 m/s and vb=32 m/s. answer the following questions:

(a) how far does the golf ball travel horizontally before returning to ground level?
(b) what is the maximum height above ground level attained by the ball?

In a steady-flow steam power plant system, two adiabatic high-pressure and low-pressure turbines ane used to generate power. superheated steam enters the high-pressure turbine at 8 mpa and 550°c. the steam expands in the high-pressure turbine to a saturated vapor at 3 mpa. in order to increase the powe generation of the power plant, another steam turbine working in a lower pressure ranges is deployed. the outlet vapor from the first turbine is heated up at a boiler to the temperature of 500 c at the constant pressure of first turbine's outlet (3 mpa). then, the vapor enters the second turbine and produces extra work. the exit conditions of the second turbine are 5o kpa and 90 percent quality. if the total power output of the power plant is 25 mw, determine a) the mass flow rate of the water (kg/s). b) heat transfer rate in the boiler (mw). (30 points) 3 mpa 00 c 8 mpa s0 c high pres turbine low pres boiler turbine 50 kpa 3 mpa 09 saturated vapor t heat engine, shown in the figure, operates between high temperature and low temperature of through a heat 4. a carnot tn and tu respectively. this heat engine receives energy from a heat reservoir at t exchanger where the heat transferred is proportional to the temperature difference as ? = k (z,-7, ). it rejects heat at a given low temperature tl. to design the heat engine for maximum work output, find the high temperature, th, as a function of tes and t. (15 points) qe

When considering gravity acceleration and the force of acceleration, what must be true? a. the direction of acceleration must be perpendicular to the direction of the force. b. the direction of the force and the direction of acceleration must be the same as each other. c. the direction of the force and the direction of acceleration must be opposite of each other. d. the mass of the body must be the same as the acceleration of the body.

The coefficient of friction is a number that represents the resistance to sliding between two in contact with one another.