Physics, 03.04.2020 16:02 parkerfreeze

A 4.00-g bullet is moving horizontally with a velocity = 345 m/s, where the sign + indicates that it is moving to the right (see part a of the drawing). The bullet is approaching two blocks resting on a horizontal frictionless surface. Air resistance is negligible. The bullet passes completely through the first block (an inelastic collision) and embeds itself in the second one, as indicated in part b. Note that both blocks are moving after the collision with the bullet. The mass of the first block is 1150 g, and its velocity is +0.452 m/s after the bullet passes through it. The mass of the second block is 1530 g. (a) What is the velocity of the second block after the bullet imbeds itself? (b) Find the ratio of the total kinetic energy after the collision to that before the collision.

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 03:00

Ahot-air balloonist, rising vertically with a constant speed of 5.00 m/s releases a sandbag at the instant the balloon is 40.0 m above the ground. after it is released, the sandbag encounters no appreciable air drag. compute the velocity of the sandbag at 0.250 s after its release.

Answers: 2

Answer

Physics, 22.06.2019 16:30

In a heat engine if 1000 j of heat enters the system and the piston does 500j of work, what is the final internal energy of the system if the inital energy was 2000 j1.write the equation2.list out your known variables 3. plug the numbers into the equations4.solve 5.write your solution statement that includes initial energy and final energy added.

Answers: 3

Answer

Physics, 22.06.2019 18:00

Asynthetic fiber used in manufacturing carpet has tensile strength that is normally distributed with mean 75.5 psi and standard deviation 3.5 psi. how is the standard deviation of the sample mean changed when the sample size is increased from n equals 8 to n equals 47

Answers: 2

Answer

Physics, 22.06.2019 19:10

3. a worker pushes a 30.5 kg polished stone along a polished table with a force on bonin a straight line for 5.20 s after starting from rest. there is no friction between thestone and the table. at the end of the table. the stone is hooked to a cable with a lengthof 62.0 cm to rotate it to a rough table to store until they can be picked up. the roughtable has a coefficient of static friction 0.702 with the polished stone. remember that 8= 9.80 m/s2a) what is the speed of the stone when it is hooked to the cable? b) what is the tension in the cable while the stone is rotating? (there is still nofriction)c) how much force is needed to make the stone begin sliding from rest on therough table? ius = 0.70262.0 cm30.5 kg20.5 kg6= 0

Answers: 2

Answer

You know the right answer?

A 4.00-g bullet is moving horizontally with a velocity = 345 m/s, where the sign + indicates that it...

Questions