Physics, 01.04.2020 18:26 Niyah3406

A screwdriver is an example of a wheel and axle, which is a type of simple machine. The mechanical advantage of a wheel and axle is the ratio of the radius of the wheel to the radius of the axle. The force required to turn a screw can be reduced by
A) reducing the length of the axle.
B) increasing the radius of the axle.
C) reducing the length of the handle.
D) increasing the radius of the handle

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 10:00

Two objects of different mass start from rest, are pulled by the same magnitude net force, and are moved through the same distance. the work done on object 1 is 900 j. after the force has pulled each object, object 1 moves twice as fast as object 2. how much work is done on object 2?

Answers: 1

Answer

Physics, 22.06.2019 16:50

Consider the growth of a 20-nm-diameter silicon nanowire onto a silicon wafer. the temperature of the wafer surface is maintained at 2400 k. assume the thermal conductivity of the silicon nanowire is 20 wm-1k-1 and all its surfaces including the tip are subjected to convection heat transfer with the coefficient h = 1×105 wm-2k-1 and t∞ = 8000 k. when the nanowire grows to l = 300 nm, what is the temperature of the nanowire tip (t (x =

Answers: 1

Answer

Physics, 22.06.2019 23:20

Acharge q experiences no net force at a particular point in space. which of the following situations described below must always be true? -there are no other charges nearby. -if there are other charges nearby, they must all have the same sign as q. -if there are other charges nearby, they must all have the opposite sign of q. -if there are other charges nearby, the total positive charge must equal the total negative charge. -none of the above

Answers: 2

Answer

Physics, 23.06.2019 06:00

The frequency of a tuning fork can be found by the method shown. a long tube open at both ends is submerged in a beaker of water, and the vibrating tuning fork is placed near the top of the tube. the length l of the air column is adjusted by moving the tube vertically. the sound waves generated by the fork are reinforced when the length of the air column corresponds to one of the resonant frequencies of the tube. the smallest value for l for which a peak occurs in sound intensity is 7 cm. l what is the frequency of the tuning fork? the speed of sound in air is 345 m/s. answer in units of hz

Answers: 2

Answer

You know the right answer?

A screwdriver is an example of a wheel and axle, which is a type of simple machine. The mechanical a...

Questions