Physics, 30.03.2020 18:53 kelseatuttleni

A 5.0-kg crate is resting on a horizontal plank. The coefficient of static friction is 0.50 and the coefficient of kinetic friction is 0.40. What is the force of friction after one end of the plank is raised so the plank makes an angle of 30 with the horizontal?

Answers: 2

Show answers

Answers

Answer from: sanchez7489

The force of friction after one end of the plank is raised so the plank makes an angle is 21.2 N.

The given parameters;

mass of the crate, m = 5 kgcoefficient of static friction, $\mu_s$ = 0.5coefficient of kinetic friction, $\mu_k$ = 0.40angle of inclination, θ = 30⁰

The normal force on the crate is calculated as follows;

$F_n = mg \times cos \theta\\\\F_n = 5 \times 9.8 \times cos(30)\\\\F_n = 42.43 \ N$

The force of friction after one end of the plank is raised so the plank makes an angle is calculated as follows;

$F_f = \mu_s F_n\\\\F_f = 0.5 \times 42.34\\\\F_f = 21.2 \ N$

Learn more here:link

Answer from: bellamore

The mass of the crate is 5kg.

We know that the force of friction can be obtained by:

F = N*k

where k is the coefficient of friction, where we use the static one if the object is at rest, and the kinetic one if the object os moving. N is the normal force

If we tilt the base making an angle of 30° with the horizontal, now the normal force against the plank will be equal to the fraction of the weight in the direction normal to the surface of the plank.

Knowing that the angle is 30°, then the fraction of the weight that pushes against the normal is Cos(30°)*W = cos(30°)*5kg*9.8m/s^2 = 42.4N

The fraction of the force in the parallel direction to the plank (the force that would accelerate the crate downwards) is:

F = sin(30°)*5k*9,8m/s = 24.5N

now, the statical friction force is:

Fs = 42.4N*0.5 = 21.2N

The statical force is less than the 24.5N, so the crate will move downwards, then the force that acts on the crate is the kinetic force of friction:

Fk = 42.4N*0.4 = 16.96N

Then, the total force that acts on the crate is:

total force = F - Fk = 24.5N - 16.69N = 7.54N and the direction of this force points downside along the parallel direction of the plank.

Answer from: Quest

B. a circuit. i think

Answer from: Quest

Answer: buoyancy forceexplanation: in simple terms, the principle states that the buoyancy force on an object is equal to the weight of the fluid displaced by the object, or the density of the fluid multiplied by the submerged volume times the gravitational acceleration, g. this is also known as upthrust.

Another question on Physics

Physics, 21.06.2019 14:00

Acar tire contains 0.0380 m^3 3 of air at a pressure of 2.20 ×10^{5} 5 n/m^2 2 (about 32 psi). how much more internal energy does this gas have than the same volume has at normal atmospheric pressure, 1.01x10^5 5 pa?

Answers: 2

Answer

Physics, 22.06.2019 15:00

10 points! will mark brainiest! in a heat engine if 1,000 j of heat enters the system and the piston does 500 j of work, what is the final internal energy of the system if the initial energy was 2,000 j 1: write the equation 2: list out your known variables 3: plug the numbers into the equations 4: solve 5: write your solution statement that includes initial energy and final energy added you so much!

Answers: 3

Answer

Physics, 22.06.2019 19:40

It may seem strange that the selected velocity does not depend on either the mass or the charge of the particle. (for example, would the velocity of a neutral particle be selected by passage through this device? ) the explanation of this is that the mass and the charge control the resolution of the device--particles with the wrong velocity will be accelerated away from the straight line and will not pass through the exit slit. if the acceleration depends strongly on the velocity, then particles with just slightly wrong velocities will feel a substantial transverse acceleration and will not exit the selector. because the acc

Answers: 1

Answer

Physics, 22.06.2019 23:30

What kind of waves require a medium to travel? question 6 options: light waves mechanical waves all waves need a medium to travel electromagnetic waves

Answers: 1

Answer

You know the right answer?

A 5.0-kg crate is resting on a horizontal plank. The coefficient of static friction is 0.50 and the...

Questions