Answers: 1
Physics, 22.06.2019 05:10
Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.
Answers: 3
Physics, 22.06.2019 07:00
Photoelectrons with a maximum speed of 6.50 x 107 m/s are ejected from a surface in the presence of light with a frequency of 6.75 x 1014hz. if the mass of an electron is 9.10 x 10-31 kg, calculate in joules the maximum kinetic energy of a single electron. 3.84 x 10-15 j 1.92 x 10-15 j 5.92 x 10-23 j 3.07 x 10-16 j
Answers: 1
Physics, 22.06.2019 11:30
Water is siphoned from a large tank and discharges into the atmosphere through a 50-mm diameter tube. the end of the tube is b = 2.1 m below the tank bottom which is a = 7.4 m deep, and viscous effects are negligible. determine the maximum height h over which the water can be siphoned without cavitation occurring. atmospheric pressure is 101.4 kpa, and the water vapor pressure is 1.79 kpa (absolute)
Answers: 3
Ahiker wears a 7.5-kg backpack while climbing a mountain. after 30.0 min, the hiker is 8.2 m above t...
English, 23.09.2020 19:01
History, 23.09.2020 19:01
Mathematics, 23.09.2020 19:01
Physics, 23.09.2020 19:01
Mathematics, 23.09.2020 19:01
Mathematics, 23.09.2020 19:01
History, 23.09.2020 19:01
Social Studies, 23.09.2020 19:01
Mathematics, 23.09.2020 19:01
Mathematics, 23.09.2020 19:01
English, 23.09.2020 19:01