Which of the following sets of properties leads to a high degree of thermal shock resistance? (A) High fracture strength High thermal conductivity High modulus of elasticity High coefficient of thermal expansion (B) Low fracture strength Low thermal conductivity Low modulus of elasticity Low coefficient of thermal expansion (C) High fracture strength High thermal conductivity Low modulus of elasticity Low coefficient of thermal expansion (D) Low fracture strength Low thermal conductivity High modulus of elasticity High coefficient of thermal expansion

The correct Answer is C) High fracture strength, High Thermal Conductivity, Low modulus of elasticity, Low coefficient of thermal                                                                                                                                                                                                                                              

Explanation:

The ability of a solid to withstand sudden changes in temperature either during heating or cooling is known or referred to as Thermal Shock Resistance (TSR).

Thermal shock resistance is one of the most crucial factors of performance in solids for high temperature environments that can cause thermal stresses and risks for thermal shock damage.

Examples are as of such environments are energy conversion systems, electronic devices and cutting tools.

A common way to evaluate TSR is to look for maximum jump in surface temperature which a material can sustain without cracking.  This is known as thermal conductivity.

Failure due to thermal shock can be prevented by;

Thermal conductivity is an intensive physical property of a material that relates the heat flow through the material per unit area to temperature gradient across the material. The thermal conductivity of a material is basically a measure of its ability to conduct heat.    

The other factor that contributes to a high degree of thermal shock is:

Fracture Strength: This is the ability of a material containing a crack to resist fracture or resist becoming brittle. For example, glass has a high strength, but the presence of a small fracture reduces the strength. Therefore, glass has low fracture resistance. Fracture toughness is an important consideration in hydraulic fracture design.

Modulus of Elasticity:

An object or substance's resistance to being deformed elastically (i.e., non-permanently) when a stress is applied to it is calculated  or measured by a quantity known as Elastic Modulus (also known as Young modulus of elasticity)

A stiff material has a high Young's modulus and changes its shape only slightly under elastic loads (e.g. steel or diamond). A flexible material has a low Young's modulus and changes its shape considerably (e.g. rubbers).

Coefficient of thermal expansion (CTE) this refers to how the rate of change in the  size of an object with respect of every degree change in temperature assuming that pressure remains the same. An object with low CTE is Fine Ceramics or Advanced Ceramics.

Cheers!

d

explanation:

v=uf/(u-f)

= 5.10/(5-10) convex lens has positive focal length

=50/-5

=-10 cm (formed at other side)

u can delete ur account.

1. go on google and write

2 open this and click on your profile pic and if your profile is not appearing, then u have to log in.

3. when u click on your profile pic, there appears four options on the top.

4. click on the 1st option and scroll down and go at the bottom.

5. click on edit profile.

6. there appears a option 'prefernces' and at that option at the right side , 'edit' is written.

7. click on the edit option.

8. there is a option " i want to delete my account" and click on that.

hope this u

and ur welcm

: )