A 30-g bullet is fired with a horizontal velocity of 460 m/s and becomes embedded in block B which has a mass of 3 kg. After the impact, block B slides on 30-kg carrier C until it impacts the end of the carrier. Knowing the impact between B and C is perfectly plastic and the coefficient of kinetic friction between B and C is 0.2, determine the energy loss due to friction and the impacts. The energy lost due to friction is J. The impact loss due to AB impacting the carrier is J. The impact loss at first impact is J.

energy loss due to friction and the impacts = 2.97 J; The impact loss due to AB impacting the carrier is =25.72J; The impact loss at first impact is 6,316.64J

Explanation:

First find the velocity of the bullet after the first impact using

M1V1 + 0 = (M1 + M2)v'

Where M1 is the mass of the bullet

M2 is the mass of the block B

M3 is the mass of the carrier

v' is the velocity

v' = M1V1/(M1 + M2)

v'= (30 × 10^-3 kg)(460 m/s) / (30 × 10^-3 kg + 3 kg)

v' = 13.8/3.03

v'= 4.55m/s

Also calculate final velocity of the carrier v2'

v2' = M1V1/(M1 + M2 + M3)

v2'= (30 × 10 kg)(460 m/s) / (30 × 10 kg + 3 kg + 30kg)

v2' =0.42m/s

Now to calculate energy loss due to friction

Normal force

N= W1 + W2 = (m1 + m2)g

Where W1 and W2 is the weight of the bullet and block respectively

g is gravitational acceleration for taken as 9.81m/s

= (0.030 kg + 3 kg)(9.81 m/s) 29.724 N

Friction force = coefficient of kinetic× normal force

Where coefficient of kinetic = 0.2

Ff = (0.2)(29.724)= 5.945 N

Now

Energy loss due to friction = frictional force × distance

Assume distance is 0.5 m.

Energy loss due to friction = 5.945 N × 0.5 m

= 2.97J

Kinetic energy of block with embedded bullet immediately after first impact:

1/2 × (m1 + m2)(v')^2

1/2 × (30 × 10^-3 kg + 3 kg)(4.55m/s)^2

= 1/2 × (3.03kg) × (4.55m/s)^2

= 31.36 J

Final kinetic energy of bullet, Block, and Carrier together

1/2 × (m1 + m2 + m3)(v2')^2

1/2 × (30 × 10^-3 kg + 3 kg + 30kg) (0.42m/s)^2

1/2 × (33.03kg) × (0.42m/s)^2

= 2.91 J

Therefore

Loss due to friction and stopping impact = Kinetic energy of block with embedded bullet immediately after first impact - Final kinetic energy of bullet, Block, and Carrier together

= 31.36 J - 2.91 J

= 28.69 J

Impact loss due to AB impacting the carrier = loss due to friction- energy due to friction

28.69J - 2.97J

=25.72J

Initial kinetic energy of system ABC = 1/2(m1vo)

=1/2(0.030 kg)(460 m/s)^2 = 6,348J

Therefore

Impact loss at first impact = Initial kinetic energy of system ABC - Kinetic energy of block with embedded bullet immediately after first impact:

= 6,348J - 31.36 J

= 6,316.64J

question1

1,000 tons

question2

3: 8

question 3

store d

step-by-step explanation:

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water